GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville - RHD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Parking Brake Lever Pedal Assembly Replacement

Removal Procedure

    Object Number: 296112 Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the floor console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
  3. Remove the right and left sound insulators. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gauges and Console.
  4. Remove the IP Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.
  5. Remove the radio and heater controls.
  6. Remove the right knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.
  7. Remove the steering column. Refer to Steering Column Replacement in Steering Wheel and Column - Tilt.
  8. Remove the IP compartment from the instrument panel. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
  9. Remove the IP retainer from the carrier. Refer to Instrument Panel Retainer Replacement in Instrument Panel, Gauges and Console.
  10. Remove the foot base.
  11. Disconnect the parking brake cable from the parking brake lever. Refer to Park Brake Cable Replacement in Hydraulic Brakes.
  12. Disconnect the electrical connectors from the parking brake lever.
  13. Remove the parking brake lever fasteners.
  14. Remove the parking brake lever.

Installation Procedure

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 296112 Size: SH
  1. Install the parking brake lever into the vehicle.

    2. Tighten
    Tighten the parking brake lever fasteners to 27 N·m (20 lb ft).

  2. Connect the electrical connectors to the parking brake lever.
  3. Connect the parking brake cable to the parking brake lever. Refer to Park Brake Cable Replacement in Hydraulic Brakes.
  4. Install the foot base. Refer to
  5. Install the IP retainer to the carrier. Refer to Instrument Panel Retainer Replacement in Instrument Panel, Gauges and Console.
  6. Install the IP compartment to the instrument panel. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
  7. Install the steering column. Refer to Steering Column Replacement in Steering Wheel and Column - Tilt.
  8. Install the right knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.
  9. Install the radio and heater controls. Refer to
  10. Install the IP Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.
  11. Install the left and right sound insulators. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gauges and Console.
  12. Install the floor console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
  13. Enable the SIR system. Refer to Enabling the SIR System in SIR.