GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville - RHD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Parking Brake Cable Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 106181 Size: SH
  2. Disconnect the front parking brake cable (2) from the intermediate cable (1).
  3. Release the front parking brake cable locking tabs and push the cable into the vehicle.
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  5. Remove the left I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement in Body and Accessories.
  6. Remove the right I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement in Body and Accessories.
  7. Remove the left and right console side trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Left Side in Body and Accessories.

    8. Object Number: 296112 Size: SH
  8. Disconnect the front parking brake cable from the parking brake pedal.
  9. Remove the front left carpet retainer.

    10. Object Number: 296105 Size: SH
  10. Pull the carpet back in the left front floor pan area to expose the front park brake cable retainer and the cable pass through grommet.
  11. Remove the parking brake cable retainer from the left front floor pan.

    12. Object Number: 106200 Size: SH
  12. Unseat the cable grommet from the floor and remove the cable from the vehicle.

Installation Procedure

    Object Number: 106200 Size: SH
  1. Install the front parking brake cable into the floor pan and seat the grommet.
  2. Route the parking brake cable to the parking brake pedal.

    3. Object Number: 296105 Size: SH
  3. Fasten the parking brake cable housing to the stud on the floor pan.

    4. Object Number: 296112 Size: SH
  4. Connect the parking brake cable to the parking brake pedal.
  5. Reposition the floor carpeting.
  6. Install the carpet retainers.
  7. Install the left and right console side trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Left Side in Body and Accessories.
  8. Install the left I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement in Body and Accessories.
  9. Install the right I/P closeout panel. Refer to Instrument Panel Insulator Panel Replacement in Body and Accessories.
  10. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    11. Object Number: 106181 Size: SH
  11. Connect the front parking brake cable (2) to the intermediate cable(1).
  12. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.