Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The RH mirror does not move UP or DOWN, LEFT or RIGHT. | ||||
1 | Were you sent here from the DCM Diagnostic System Check? | -- | ||
2 | Check if any mirror DTCs are stored in the RDCM and LDCM as history. Refer to Diagnostic Trouble Code (DTC) List/Type . Are any DTCs stored as history? | -- | Go to the Applicable Table | |
3 | Using the mirror switch, select the LH mirror and operate the LH mirror UP, DOWN, LEFT and RIGHT. Does the LH mirror operate in all directions? | -- | ||
4 |
Does the scan tool display ACTIVE when the RH mirror select switch is pressed? | -- | ||
5 | Using a scan tool, select RDCM and command the RH mirror UP and DOWN. Does the RH mirror move UP and DOWN? | -- | ||
6 | Using a scan tool, select RDCM and command the RH mirror LEFT and RIGHT. Does the RH mirror move LEFT and RIGHT? | -- | System OK | |
7 |
Does the test light turn ON and OFF with each command? | -- | ||
8 |
Does the test light turn ON and OFF with each command? | -- | ||
9 | Check for an open or short to ground in CKT 889 or CKT 1498. Was a problem found and repaired? | -- | ||
10 | Check for an open or short to ground in CKT 90 or CKT 881. Was a problem found and repaired? | -- | ||
11 | Check for an open in CKT 1497 or CKT 150. Was a problem found and repaired? | -- | ||
12 | Replace the RH mirror assembly. Refer to Outside Rearview Mirror Replacement . Is the replacement complete? | -- | -- | |
13 |
Is the replacement complete? | -- | -- | |
14 | Replace the LH door switch assembly. Refer to Power Mirror Switch Replacement . Is the replacement complete? | -- | -- | |
15 |
Is the repair complete? | -- | System OK | -- |
