A Door Control Module (DCM) DTC can only be cleared in one of the following three ways:
• | Using the IPC Clearing feature. |
• | Using a scan tool. |
• | A DCM will automatically clear a DTC if the malfunction has not occurred within 50 ignition cycles. |
Disconnecting the battery and/or a DCM connector will not clear a DTC. Most all information in diagnostic tables will refer to the scan tool for diagnostic support. For details on using the on-board diagnostic feature to access and/or clear DTCs. Refer to On-Board Diagnostics .
Clear any history DTC after a system malfunction is corrected in order to prevent future misdiagnosis.