GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Channel Retainer Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the door garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .
  3. Remove the inner and the outer belt moldings. Refer to Molding Replacement - Window Belt .
  4. Remove the window run channel from the header of the door frame.

    5. Object Number: 259098 Size: SH
  5. Remove the top screw and the lower bolt from the rear door stationary window.
  6. Lower the assembly in order to gain access to the retainer screws (2).
  7. Remove the 6 attaching screws (2).
  8. Remove the retainer (1).

Installation Procedure

    Object Number: 259098 Size: SH
  1. Install the retainer (1) and align the tab in the door frame slot.
  2. Install the 6 screws (2).
  3. Install the rear stationary window.
  4. Starting at the rear corner, insert the extrusion of the channel into the retainer.
  5. Insert the inner seal lip of the channel behind the garnish molding.
  6. Install the inner and the outer belt moldings. Refer to Molding Replacement - Window Belt .
  7. Install the door garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .
  8. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .