GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Door Opening Frame Garnish Molding Replacement

Removal Procedure
  1. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .

    2. Object Number: 259093 Size: SH
  2. Remove the push pin (2) at the front lower corner.
  3. Pull the molding (1). Carefully release the clips.

Installation Procedure

    Object Number: 259093 Size: SH
  1. Position the garnish molding (1) on the door frame.
  2. Install the push pin (2) in order to locate the molding.
  3. Press the molding (1) into place.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the retaining screw.

    5. Tighten
    Tighten the retaining screw to 2.0 N·m (18 lb in).

  5. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .