GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Trim Panel Replacement

Removal Procedure

    Object Number: 259084 Size: MH
  1. Remove the door handle trim plate (3).
  2. Remove the armrest cover plate (5).
  3. Remove the 2 screws (4) from the armrest.
  4. Remove the courtesy lamp assembly (2).
  5. Remove the screw from behind the lamp assembly.
  6. Remove the trim panel. Lift up on the trim panel in order to disengage the hooks on the backside of the panel (1).
  7. Disconnect the electrical connectors.

Installation Procedure

    Object Number: 259084 Size: MH
  1. Connect the electrical connectors.
  2. Install the door trim panel by engaging the hooks on the backside of the panel (1).
  3. Ensure that the door trim panel is fully seated prior to fastener installation.
  4. Install the screw behind the lamp assembly.
  5. Install the courtesy lamp assembly (2).
  6. Install the 2 screws (4) in the armrest.
  7. Install the armrest cover plate (5).
  8. Install the door handle trim plate (3).