Rear Compartment Lid Release Inoperative Through I/P Switch and RKE
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Check the R/CMPT REL fuse for an open. Is the R/CMPT REL fuse open? | -- | ||
2 |
Is the test light on? | -- | ||
3 |
Is the test light on? | -- | ||
4 | Repair short to ground in circuit 840. Is the repair complete? | -- | Go to Step 36 | -- |
5 | Repair short to ground in circuit 275. Is the repair complete? | -- | Go to Step 36 | -- |
6 | Replace the R/CMPT REL fuse. Is the repair complete? | -- | Go to Step 36 | -- |
7 |
Did the test light turn on? | -- | ||
8 | Check the rear compartment lid lock release actuator for mechanical interference Is there a mechanical interference? | -- | ||
9 | Using a test light, backprobe between the rear compartment lid lock release actuator connector terminal B and B+. Is the test light on? | -- | ||
10 |
Is the test light on? | -- | ||
11 | Repair poor connection or open in circuit 350. Is the repair complete? | -- | Go to Step 36 | -- |
12 | Repair poor connection or open in circuit 56. Is the repair complete? | -- | Go to Step 36 | -- |
13 | Using a test light, backprobe between the rear compartment lid release relay connector terminal A1 and ground. Is the test light on? | -- | ||
14 | Using a test light, backprobe between the rear compartment lid release connector terminal C1 and ground. Is the test light on? | -- | ||
15 | Using a test light, backprobe between the underhood accessory wiring junction block connector C1 terminal F9 and ground. Is the test light on? | -- | ||
16 |
Is the test light on? | -- | ||
17 | Using a test light, backprobe between the underhood accessory wiring junction block connector C2 terminal B9 and ground. Is the test light on? | -- | ||
18 | Replace the rear compartment lid release relay. Is the repair complete? | -- | Go to Step 36 | -- |
19 |
Is the test light on? | -- | ||
20 |
Is the test light on? | -- | ||
21 | Repair short to B+ in circuit 253. Is the repair complete? | -- | Go to Step 36 | -- |
22 | Replace the Remote Control Door Lock Receiver (RCDLR). Refer to Receiver Replacement in Keyless Entry. Is the repair complete? | -- | Go to Step 36 | -- |
23 | Using a test light, backprobe between the underhood accessory wiring junction block connector C2 terminal C9 and ground. Is the test light on? | -- | ||
24 | Repair poor connection or open in circuit 275 between the underhood accessory wiring junction block connector C2 terminal C9 and the rear compartment lid release relay terminal A1. Is the repair complete? | -- | Go to Step 36 | -- |
25 | Repair poor connection or open at the rear compartment lid release relay. Is the repair complete? | -- | Go to Step 36 | -- |
26 |
Is the test light on? | -- | ||
27 | Repair poor connection or open in circuit 275. Is the repair complete? | -- | Go to Step 36 | -- |
28 | Replace the underhood accessory wiring junction block. Refer to Underhood Fuse Block Replacement in Engine Electrical. Is the repair complete? | -- | Go to Step 36 | -- |
29 |
Is there continuity though the transaxle range switch? | -- | ||
30 | Check for poor connection or open in circuit 840 between the transaxle range switch connector C1 terminal B and the underhood accessory wiring junction block connector C1 terminal F1. Is there an open or a poor connection in circuit 840? | -- | ||
31 | Repair poor connection or open in circuit 275 between the transaxle range switch connector C1 terminal C and the underhood accessory wiring junction block connector C1 terminal F9. Is the repair complete? | -- | Go to Step 36 | -- |
32 | Adjust/replace the transaxle range switch. Refer to Park/Neutral Position Switch Adjustment or to Park/Neutral Position Switch Replacement in Automatic Transaxle for replacement procedures. Is the repair complete? | -- | Go to Step 36 | -- |
33 | Repair poor connection or open in circuit 840 between the underhood accessory wiring junction block connector C1 terminal F1 and the transaxle range switch connector C1 terminal B. Is the repair complete? | -- | Go to Step 36 | -- |
34 | Repair or replace the rear compartment lid lock. Refer to Rear Compartment Lid Latch Replacement in Body Rear End. Is the repair complete? | -- | Go to Step 36 | -- |
35 | Replace the rear compartment lid lock release actuator. Refer to Rear Compartment Lid Latch Replacement in Body Rear End. Is the repair complete? | -- | Go to Step 36 | -- |
36 |
Is the repair complete? | -- | -- |
Rear Compartment Lid Release Inoperative I/P Switch Inop but RKE OK
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Press the fuel tank filler door release switch. Does the fuel tank filler door release? | -- | ||
2 |
Did the test light illuminate? | -- | ||
3 | Using a test light, backprobe between the rear compartment lid and fuel tank filler door release switch harness connector terminal 5 and B+. Is the test light on? | -- | ||
4 | Replace the rear compartment lid and fuel tank filler door release switch. Refer to Instrument Panel Multifunction Switch Assembly Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | -- | |
5 | Repair poor connection or open in circuit 1450. Is the repair complete? | -- | -- | |
6 | Repair poor connection or open in circuit 253 between the rear compartment lid and fuel tank filler door release switch connector terminal 4 and the rear compartment lid release relay. Is the repair complete? | -- | -- |
