| Figure 1: |
Underhood Accessory Wiring Junction Block
| |
| Figure 2: |
Underhood Accessory Wiring Junction Block Label
|
Fuse/Circuit Breaker | Rating | Description |
|---|---|---|
1-COOL FAN 2 MaxiFuse® | 30A | B+ to the COOL FAN 2 relay and the COOL FAN 3 relay. |
2-CRANK MaxiFuse® | 40A | B+ to the CRANK relay. |
3-BAT #3 MaxiFuse® | 60A | B+ to the REAR DEFOG and the POWER SEAT circuit breakers. |
4-BAT #2 MaxiFuse® | 60A | B+ to the HIGH BLOWER, HAZARD, STOP LAMPS, DOOR LOCKS, and POWER MIRRORS fuses. |
5-IGN 1 MaxiFuse® | 30A | B+ to the ignition switch for the PWR WINDOWS PWR SUNROOF circuit breaker, and the ABS, BTSI, TURN SIGNALS, AIR BAG, CLUSTER, DRL, PCM-BCM, WIPER, POWER DROP, and RADIO-CRUISE fuses. |
6-COOL FAN 1 MaxiFuse® | 40A | B+ to the COOL FAN 1 relay. |
7-BAT #1 MaxiFuse® | 60A | B+ to the RADIO-HVAC, ABS-BCM, CIGAR LTR, INADV POWER BUS and CD CHANGER fuses. |
8-IGN 2 MaxiFuse® | 50A | B+ to the ignition switch to the IGN 0, LOW BLOWER, HVAC, CRUISE, and CRANK SIGNAL fuses. |
21-GEN Fuse | 10A | B+ to the generator. |
22-ECM Fuse | 10A | B+ to the PCM. |
23-A/C CLU Fuse | 10A | B+ to the A/C CLU relay. |
25-ELEK IGN Fuse | 15A | Hot with the ignition switch in the on or start position to the ICM. |
26-TRANS Fuse | 10A | Hot with the ignition switch in the on or start position to the TCC PWM SOL valve, 1-2 SS valve, and 2-3 SS valve. |
27-HORN Fuse | 15A | B+ to the HORN relay. |
28-F/INJR Fuse | 15A | Hot with the ignition switch in the on or start position to fuel injectors #1, 2, 3, 4, 5, and 6. |
29-OXY SEN Fuse | 15A | Hot with the ignition switch in the on or start position to the HO2S #1 and HO2S #2. |
30-ENG EMIS Fuse | 10A | Hot with the ignition switch in the on or start position to the EVAP canister purge solenoid valve, EVAP canister vent solenoid valve, MAF sensor, and the stop lamp switch. |
32-HDLP R Fuse | 15A | B+ to the RH headlamp. |
33-R/CMPT REL Fuse | 7.5A | B+ to the transaxle range switch. |
34-LP PARK Fuse | 20A | B+ to the headlamp switch and the DRL control module. |
35-F/PMP Fuse | 15A | B+ to the F/PMP relay. |
36-HDLP L Fuse | 15A | B+ to the LH headlamp. |
Instrument Panel Fuse Block
Fuse/Circuit Breaker | Rating | Description |
|---|---|---|
ABS Fuse | 10A | Hot the with ignition switch in the on or start position to the EBTCM, electronic brake control relay, and electronic traction control switch. |
ABS Fuse | 20A | Hot with the electronic brake control relay energized for the LF and RF brake solenoid valves. |
ABS-BCM Fuse | 10A | B+ to the BCM, and the EBTCM . |
AIR BAG Fuse | 15A | Hot with the ignition switch in the on or start position to the SDM. |
BTSI Fuse | 10A | Hot with the ignition switch in the on or start position to the stop lamp switch. |
CD CHANGER Fuse | 10A | B+ to the CD player. |
CIGAR LTR Fuse | 20A | B+ to the accessory power receptacle, cigar lighter, and the power drop connector. |
CLUSTER Fuse | 10A | Hot with the ignition switch in the on or start position to the instrument cluster. |
CRANK SIGNAL Fuse | 10A | Hot with the ignition switch in start position to the BCM, instrument cluster, and the PCM. |
CRUISE Fuse | 10A | Hot with the ignition switch in the on position to the cruise control module. |
DOOR LOCKS Fuse | 20A | B+ to the BCM for the auto door locks and the door lock relay. |
DRL Fuse | 10A | Hot with the ignition switch in the on or start position to the DRL control module. |
FRT PARK LPS Fuse | 10A | Hot with parklamps on to FOG LP relay (if equipped), LH/RH front side marker lamps, and LH/RH park/turn signal lamps. |
HAZARD Fuse | 15A | B+ to the hazard warning switch. |
HEATED MIRROR Fuse | 10A | Hot with rear defog relay energized for the LH and RH outside rearview mirrors. |
HIGH BLOWER Fuse | 25A | B+ to the blower motor control module (RPO CJ2) or the blower motor resistor (RPO C67). |
HVAC Fuse | 10A | Hot with the ignition switch in the on position to the DRL control module, heater-A/C control, LH electric actuator, RH electric actuator (w/ RPO CJ2), rear window defogger relay, and vacuum electric solenoid. |
IGN 0 Fuse | 10A | Hot with the ignition switch in the ACCY, on, or start position to the BCM, instrument cluster, and the PCM. |
INADV POWER BUS Fuse | 15A | B+ to the BCM for the interior lamps. |
LOW BLOWER Fuse (RPO C67 Only) | 20A | Hot with the ignition switch in the on position to the heater-A/C control. |
PANEL DIMMING Fuse | 7.5A | Hot with parklamps on to the I/P lamp dimmer switch. |
PCM-BCM Fuse | 10A | Hot with ignition switch in the on or start position to the BCM, crank relay, IGN MAIN relay, and the PCM. |
POWER DROP Fuse | 10A | Hot with the ignition switch in the ACCY or on position to the power drop connector. |
POWER MIRRORS Fuse | 10A | B+ to the outside remote control rearview mirror switch. |
POWER SEATS Circuit Breaker | 30A | B+ to the driver seat adjuster switch, fuel tank filler door lock relay, and the passenger seat adjuster switch (if equipped with RPO AG2). |
PWR WINDOWS PWR SUNROOF Circuit Breaker | 30A | Hot with the ignition switch in the ACC or on position to the LF window switch and the sunroof module (if equipped with RPO CF5). |
RADIO-CRUISE Fuse | 2A | Hot with the ignition switch in the ACC or on position to the cruise control switch, radio, and steering wheel control switches. |
RADIO-HVAC Fuse | 15A | B+ to the DLC, heater-A/C control, instrument cluster, low frequency audio amplifier (if equipped with RPO U85), radio, and the RCDLR. |
REAR DEFOG Circuit Breaker | 30A | B+ to rear window defogger relay. |
RED STRG WHL ILLUM Fuse | 2A | Variable dimming signal to the steering wheel control switches. |
STOP LAMPS Fuse | 15A | B+ to the stop lamp switch. |
TAIL LAMPS Fuse | 15A | Hot with parklamps on to the LH/RH rear side marker lamps, LH/RH tail/stop lamps, PANEL DIMMING fuse, and the rear license plate lamps. |
TURN SIGNALS CORN LPS Fuse | 10A | Hot with the ignition switch in the on or start position to the hazard warning switch and the turn signal switch. |
WIPER Fuse | 25A | Hot with the ignition switch in the ACC or on position to the windshield wiper motor and the windshield wiper/washer switch Note: The WIPER fuse was relocated after the Start Of Regular Production (SORP). Therefore, WIPER fuse is located at one of two locations. |
