Rocker Panel Molding Replacement Base

1. Open the doors.



2. Remove the front wheel flare. Refer to Front Wheel Opening Flare Replacement .
3. Remove the rear wheel flare. Refer to Rear Wheel Opening Flare Replacement .
4. Remove the push-pins from the underside of the vehicle.
5. Pull the molding away from the vehicle with sufficient pressure to disengage the retaining clips from the body.
6. Remove the rocker panel molding from the vehicle.

1. Install the rocker panel molding to the vehicle.
2. Push the molding toward the vehicle with sufficient pressure to engage the retaining clips into the body.
3. Install the push-pins to the underside of the vehicle.
4. Install the rear wheel flare. Refer to Rear Wheel Opening Flare Replacement .
5. Install the front wheel flare. Refer to Front Wheel Opening Flare Replacement .
6. Close the doors.