Rear Wheel Opening Flare Replacement SUV

1. Remove the retaining screws from the wheel flare.
2. Remove the push-pin retainer from the rocker protection molding.
3. Remove the wheel flare from the vehicle.

1. Position the wheel flare to the vehicle.
2. Install the push-pin retainer to the rocker protection molding.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the retaining screws to the wheel flare.

Tighten
Tighten the screws to 3 N·m (26 lb in).

Rear Wheel Opening Flare Replacement SUT

1. Remove the screws (1) from the wheelhouse opening flare (2).
2. Remove the lower rocker panel retainers (3) securing the front lower edge of the rear flare to the body.
3. Remove the wheelhouse flare (2) from the wheelhouse opening.

1. Position the wheelhouse flare (7) to the wheelhouse opening (3).
2. Loosely install the screws.

Notice: Refer to Fastener Notice in the Preface section.

3. Install and secure the lower front rocker panel retainers.

Tighten
Tighten the screws to 3 N·m (26 lb in).