Front Wheel Opening Flare Replacement Base

1. Open the hood.



2. Remove the retaining screws from the wheel flare and the wheel liner.



3. Remove the push-pin retainers from the rocker protection molding.
4. Remove the wheel flare from the vehicle.

1. Position the wheel flare to the vehicle.



2. Install the push-pin retainers to the rocker protection molding.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the retaining screws to the wheel flare and the wheel liner.

Tighten
Tighten the screws to 3 N·m (26 lb in).

4. Close and secure the hood.