Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
DEFINITION: The RH door lock does not LOCK or UNLOCK from the RH door lock switch. | ||||||||||
1 | Were you sent here from the DCM Diagnostic System Check? | -- | ||||||||
2 | Check if any of the following DTCs are stored in the RDCM as history:
Are any of these DTCs stored as history? | -- | Go to the Applicable Table | |||||||
3 | Check the RH door lock for mechanically malfunctions (binding or bent lock rod, obstructions, etc.). Was a problem found and repaired? | -- | ||||||||
4 | Using a scan tool, select RDCM and command the RH door to LOCK and UNLOCK the RH door. Does the RH door LOCK and UNLOCK? | -- | ||||||||
5 |
Does the test light turn ON and OFF with each command? | -- | ||||||||
6 |
Does the scan tool display ACTIVE? | -- | ||||||||
7 |
Does the scan tool display ACTIVE? | -- | System OK | |||||||
8 | Check for an open or short to ground in CKT 294 or CKT 295. Was a problem found and repaired? | -- | ||||||||
9 | Check for an open in CKT 781 or CKT 150. Was a problem found and repaired? | -- | ||||||||
10 | Check for an open in CKT 780 or CKT 150. Was a problem found and repaired? | -- | ||||||||
11 | Replace the RH door lock motor. Refer to Door Lock Replacement . Is the replacement complete? | -- | ||||||||
12 |
Is the replacement complete? | -- | -- | |||||||
13 | Replace the RH door switch assembly. Refer to Door Lock Switch Replacement . Is the replacement complete? | -- | -- | |||||||
14 |
Is the repair complete? | -- | System OK | -- | ||||||
