Removal Procedure
- Remove the center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement .
- Remove the rear assist handle and coat hook. Refer to Assist Handle and Rear Coat Hook Replacement .
- Remove the roof rail courtesy reading lamp. Refer to Roof Side Rail Lamp Replacement in Lighting Systems.
- Remove the bolt from the rear seat shoulder height adjuster. Refer to Rear Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.
- Remove the screws covers.
- Remove the 2 screws from the rear quarter trim finish panel.
- Remove the rear quarter trim finish panel.
Pull back on the rear quarter trim finish panel in order to release the clips on the backside.
Installation Procedure
- Install the rear quarter trim finish panel.
- Install the 2 screws to the rear quarter trim finish panel .
- Install the screw covers.
- Install the bolt to the rear seat shoulder height adjuster. Refer to Rear Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.
- Install the roof rail courtesy reading lamp. Refer to Roof Side Rail Lamp Replacement in Lighting Systems.
- Install the rear assist handle and coat hook. Refer to Assist Handle and Rear Coat Hook Replacement .
- Install the center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement .
Push in on the rear quarter trim finish panel in order to insert clips.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws to 2 N·m (18 lb in).
