Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics DEFINITION: Delay and Mist are inoperative, wipers may not park, and low speed wipers may be inoperative. | ||||
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the windshield wiper/washer system operate normal? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Do the windshield wipers operate at low speed? | -- | Go to Step 4 | Go to Step 11 |
4 | Turn the windshield wiper switch to the off position. Do the windshield wipers park? | -- | Go to Step 5 | Go to Step 9 |
5 |
Is the resistance within the specified values? | 0.68K-5K ohms | Go to Step 15 | Go to Step 6 |
6 |
Is the resistance within the specified values? | 0.68K-5K ohms | Go to Step 7 | Go to Step 16 |
7 | Test and repair the interval switch signal circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 8 |
8 | Test and repair the delay switch signal circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 16 |
9 |
Is the resistance within the specified values? | 0-2 ohms | Go to Step 13 | Go to Step 10 |
10 | Test and repair the windshield wiper motor relay function supply circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 16 |
11 |
Does the test lamp illuminate? | -- | Go to Step 17 | Go to Step 12 |
12 | Test and repair the windshield wiper motor low speed supply circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 16 |
13 | Test and repair the windshield wiper motor relay ignition voltage supply circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 14 |
14 | Test and repair the windshield wiper motor relay ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 18 | Go to Step 15 |
15 | Replace windshield wiper motor relay K8. Is the repair complete? | -- | Go to Step 18 | -- |
16 | Replace the windshield wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt. Is the repair complete? | -- | Go to Step 18 | -- |
17 | Replace the windshield wiper motor. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | Go to Step 18 | -- |
18 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
