GM Service Manual Online
For 1990-2009 cars only

Step

Action

Normal Result(s)

Abnormal Result(s)*

1

  1. Connect a scan tool to the data link connector (DLC).
  2. Set the ignition switch to RUN.
  3. Attempt to establish communications with the class 2 serial data line.

The scan tool communicates with the class 2 serial data line.

Scan Tool Does Not Communicate with Class 2 Data Line

2

Attempt to establish communications with the E&C serial data line.

The scan tool communicates with the E&C serial data line.

Scan Tool Does Not Communicate with E and C Data Line

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.