Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to RUN.
- Place the HUD dim switch to maximum intensity.
|
| • | The following components illuminate for approximately 4 seconds: |
| • | The check gauges indicator |
| • | All segments of the digital speedometer |
| • | After the 4 second segment test, the HUD speedometer displays
0. |
|
Head Up Display (HUD) Inoperative
|
2
| Move the HUD dim switch from maximum to minimum intensity.
| The HUD image
intensity dims.
|
Head Up Display (HUD) Image Intensity Not Variable
|
3
|
- Move the HUD dim switch to maximum intensity.
- Use the HUD up/down switch in order to move the HUD image up and
down.
| The HUD image moves
up and down on the windshield.
|
Head Up Display (HUD) Image Height Adjustment Inoperative
|
4
|
- Start the engine.
- Drive the vehicle.
| The HUD speedometer
displays approximately the same speed as the instrument cluster.
|
Head Up Display (HUD) Speedometer Inoperative
|
5
| Press the ENG/MET switch.
| The HUD speedometer and units (MPH or km/h)
indicator change between English and metric.
|
Head Up Display (HUD) Does Not Switch Between English/Metric
|
6
|
- Turn on the hazard flashers switch.
- Turn on the headlights.
- Place the headlamp dimmer switch in HIGH.
|
| • | The left turn signal and right turn signal indicators flash. |
| • | The high beam indicator is on. |
| • | The HUD dims with the headlights on. |
| • | The HUD high beam indicator is on. |
| HUD LH Turn Signal,
Right Turn Signal and the High Beam Indicators are Inoperative
|
7
|
- Use the IP dimming switch in order to vary the intensity of the
instrument cluster display.
- Turn off the headlights.
- Move the HUD dim switch to the minimum intensity (OFF).
| The interior dimming
switch varies the HUD image intensity with the headlights on.
|
|
* Refer to the appropriate symptom diagnostic table for the applicable
abnormal result.
|
