Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the units (MPH or km/h) indicator on the instrument cluster speedometer change? | -- | Go to Step 2 | |
2 | Press the ENG/MET switch on the IP. Does the units (MPH or km/h) indicator change on the HUD display? | -- | Go to Step 3 | |
3 | Test CKT 876 for an open or short to ground. Does an open or short to ground exist in CKT 876? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the open or short to ground in CKT 876. Is the repair complete? | -- | -- | |
5 | Test CKT 879 for an open or short to ground. Does an open or short to ground exist in CKT 879? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the open or short to ground in CKT 879. Is the repair complete? | -- | -- | |
7 | Test CKT 880 for an open or short to ground. Does an open or short to ground exist in CKT 880? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open or short to ground in CKT 880. Is the repair complete? | -- | -- | |
9 | Inspect for loose or corroded terminals at the HUD module connector. Do any loose or corroded terminals exist at the HUD module connector? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the loose or corroded terminals at the HUD module connector. Is the repair complete? | -- | -- | |
11 | Replace the HUD module. Is the repair complete? | -- | -- |
