Auxiliary Air Distributor Duct Replacement RPO W01

1. Move the passenger seat to the full rearward position.
2. Remove the driver seat. Refer to Seat Replacement in Seats.
3. Pull back the front carpet. Refer to Intermediate Carpet Replacement in Interior Trim.
4. Remove the 2 fasteners from the auxiliary distribution duct.
5. Remove the distribution duct.

1. Install the auxiliary distribution duct, positioning the front of the duct into the module first.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fasteners.

Tighten
Tighten the fasteners to 9 N·m (65 lb in).

3. Install the carpet. Refer to Intermediate Carpet Replacement in Interior Trim.
4. Install the driver seat. Refer to Seat Replacement in Seats.

Auxiliary Air Distributor Duct Replacement RPO W02 Bucket Seats

1. Move both front seats to the full rearward position.
2. Remove the console assembly. Refer to Console Replacement in Instrument Panel, Gauges and Console.
3. Pull back the front carpet. Refer to Intermediate Carpet Replacement in Interior Trim.
4. Remove the 2 fasteners from the auxiliary distribution duct.
5. Remove the distribution duct.

1. Install the auxiliary distribution duct, positioning the front of the duct into the module first.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fasteners.

Tighten
Tighten the fasteners to 9 N·m (65 lb in).

3. Install the carpet. Refer to Intermediate Carpet Replacement in Interior Trim.
4. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.