GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Side Door Outside Handle Replacement

Removal Procedure

    Object Number: 868766 Size: SH
  1. Remove the rear side door lock. Refer to Rear Door Lock Replacement .
  2. Remove the following components from the door:
    3. • The TORX screw (6)
    • The outside door handle cover (1)

    Object Number: 868783 Size: SH
  3. Pull and hold the release plate of the outside handle frame.

    4. Object Number: 866517 Size: SH
  4. While holding release plate, push the outside handle toward the rear of the door and remove.

    5. Object Number: 868766 Size: SH
  5. Loosen the TORX screw (4) and remove the outside handle frame assembly (5), if necessary.
  6. Remove handle gaskets (3) from door, if necessary.

    7. Object Number: 866640 Size: SH
  7. Remove handle clip (1) if necessary, by pressing the upper and lower.

Installation Procedure

    Object Number: 866640 Size: SH
  1. Install the handle clip to the door (1), if removed.

    2. Object Number: 868766 Size: SH
  2. Install the handle gaskets (3) to the door, if removed.
  3. Install the outside handle frame assembly (5) to the door, if removed.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Secure the door handle frame (5) with the TORX screw (4), if removed.

    5. Tighten
    Tighten the TORX screw to 4.0 N·m (35 lb in).


    Object Number: 867058 Size: SH
  5. While holding the release plate, install the outer door handle to the door and slide forward.

    6. Object Number: 868766 Size: SH
  6. Install the outside door handle cover (1).
  7. Secure the outside door handle cover (1) with the TORX screw (6).

    8. Tighten
    Tighten the TORX screw to 4.0 N·m (35 lb in).

  8. Install the rear side door lock. Refer to Rear Door Lock Replacement .