GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Door Lock Replacement

Removal Procedure

    Object Number: 848545 Size: SH
  1. Remove the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement .
  2. Pull the water deflector far enough away to gain access to the door lock .
  3. Disconnect the power door lock actuator electrical connector (3), if equipped.
  4. Remove the following components from the door (1):
    5. • The 3 screws (4)
    • The door lock (5) with the cables (2) attached.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 848545 Size: SH
  1. Install the rear door lock (5) to the door (1). Secure the door lock with the 3 screws (4).

    2. Tighten
    Tighten the door lock screws to 5 N·m (43 lb in).

  2. Connect the power door lock actuator electrical connector (3), if equipped.
  3. Reposition the water deflector (3) to the door.
  4. Install the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement .