GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 HVAC 🢒 HVAC - Manual 🢒 Mode Control Cable Replacement

Removal Procedure
  1. Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .

    2. Object Number: 2015160 Size: SH

    Important: Note the routing of the cable to make installation easier.

  2. Using a taped flat-bladed tool, disengage the clip and disconnect the mode control cable from the HVAC module assembly .
  3. Remove the mode control cable from the vehicle.

Installation Procedure

    Object Number: 2015219 Size: SH
  1. Position the mode control cable in the vehicle. Route the cable as previously noted.
  2. Position the gear (1) of the mode control cable (2) and the unit link to the HVAC module assembly .
  3. Install the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .