For 1990-2009 cars only
Removal Procedure
- Raise and suitably support the hood.
- Install protective covers over the front fenders to prevent paint damage.
- Disengage the two clips (2), and remove the hood protector clip (1).
- Remove the seven retainers and the radiator support seal.
- Remove the hood insulator. Refer to Hood Insulator Replacement.
- Remove the washer nozzles. Refer to Washer Nozzle Replacement.
- Remove the washer hose assembly. Refer to Hose Replacement.
- Mark the position of the hood hinges on the hood to ease assembly.
- Remove the 2 mounting bolts which secure the hood (1) to each of the hood hinges (3).
- Remove the hood with the aid of a helper.
Installation Procedure
- Install the hood (1) with the aid of a helper to the hood hinges (3), aligning the mating marks. Secure the hood with 2 mounting bolts at each hinge. Do not tighten fully.
- Install the washer hose assembly. Refer to Hose Replacement.
- Install the washer nozzles. Refer to Washer Nozzle Replacement.
- Install the hood insulator. Refer to Hood Insulator Replacement.
- Install the seven retainers and the radiator support seal.
- Engage the two clips (2), and install the hood protector clip (1).
- Remove the protective covers from the front fenders (2).
- Adjust the hood, if necessary. Refer to Hood Adjustment .
Important: Before installing the hood, be sure to apply anti-corrosion treatment to the hood and hood hinge mating surfaces. Refer to Anti-Corrosion Treatment and Repair .
