GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Fender Replacement - Right Side

Removal Procedure

    Caution: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

  1. Raise and support the hood.
  2. Remove the right wheelhouse panel. Refer to Wheelhouse Panel Replacement.
  3. Remove the front fascia. Refer to Front Bumper Fascia Replacement.
  4. Remove the right rocker molding. Refer to Rocker Panel Molding Replacement.
  5. Remove the right headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement.

    6. Object Number: 2045206 Size: SH
  6. Remove the front fender to rocker panel bolt (3).
  7. Remove the 2 front fender to door jamb bolts (2).
  8. Remove the top 3 front fender bolts (1).
  9. Remove the 1 bolt (4) from the front of the right front fender.
  10. Remove the right front fender (5) from the vehicle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2045206 Size: SH
  1. Install the front fender (5) to the vehicle. Secure the fender with the 1 bolt (4) and tighten to 5 N·m (44 lb in).
  2. Install the top 3 front fender bolts (1) and tighten to 5 N·m (44 lb in).
  3. Install the 2 front fender to door jamb bolts (2) and tighten to 5 N·m (44 lb in).
  4. Install the front fender to rocker panel bolt (3) and tighten to 5 N·m (44 lb in).
  5. Install the right headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement.
  6. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement.
  7. Install the right rocker panel molding. Refer to Rocker Panel Molding Replacement.
  8. Install the right wheel house panel. Refer to Wheelhouse Panel Replacement.
  9. Close hood panel.