For 1990-2009 cars only
Removal Procedure
- Remove the right front lower wheel house panel. Refer to Wheelhouse Panel Replacement.
- Disconnect the washer hose from the front or rear washer motor and pump assembly, and drain the washer fluid.
- Disconnect the front or rear washer pump electrical connector (1).
- Using a small flat-bladed tool, remove the front or rear washer pump (2) from the washer solvent container (3).
Installation Procedure
- Position the front or rear washer pump (2) to the washer solvent container (3) pressing in until fully seated.
- Connect the electrical connector (1).
- Connect the washer hose to the washer motor and pump assembly and fill the washer solvent container with washer solvent fluid.
- Install the right front lower wheel house panel. Refer to Wheelhouse Panel Replacement.
