GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Systems 🢒 Mirrors 🢒 Power Mirror Replacement

Removal Procedure
  1. Remove the front side door trim. Refer to Front Side Door Trim Panel Replacement.
  2. Remove the front side door trim panel applique. Refer to Front Side Door Trim Panel Applique Replacement.

    3. Object Number: 2015632 Size: SH
  3. Push the lower part of the mirror surface and tilt it.
  4. Using a taped flat-bladed tool (2) Disengage the two clips (1) from the clearance between the outer mirror glass and visor.
  5. Disengage the remaining clip. (3).

    6. Object Number: 2015637 Size: SH
  6. Disengage the four clips and remove the outer mirror cover.

    7. Object Number: 2014665 Size: SH
  7. Disengage the clip (1).
  8. Disconnect the electrical connector (2).

    9. Object Number: 2014668 Size: SH
  9. Remove the three screws.
  10. Disengage the clip and remove the outer rear view mirror.

Installation Procedure

    Object Number: 2014668 Size: SH
  1. Engage the clip, and install the outer rear view mirror assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the three screws. Tighten the outside rearview screws to 9 N·m (80 lb in).

    3. Object Number: 2014665 Size: SH
  3. Connect the electrical connector (2).
  4. Engage the clip (1).

    5. Object Number: 2015639 Size: SH
  5. Engage the seven clips and install the outer mirror cover.
  6. Install the front side door trim applique. Refer to Front Side Door Trim Panel Applique Replacement.
  7. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement.