GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Side Door Trim Panel Replacement

Removal Procedure
  1. Remove the door window regulator handle, if equipped. Refer to Door Window Regulator Handle Replacement .

    2. Object Number: 2014628 Size: SH
  2. Using a taped flat-bladed tool, disengage the three clips, and remove the front door inside handle bezel.

    3. Object Number: 2014631 Size: SH
  3. Using a taped flat-bladed tool, disengage the clip and the seven retainers.
  4. Disconnect the electrical connector, if equipped.
  5. Remove the front door trim armrest.
  6. Remove the power accessory switch panel, if equipped. Refer to Power Accessory Switch Panel Replacement .
  7. Remove the right front door power switch, if equipped. Refer to Front Side Door Window Switch Replacement - Right Side .

    8. Object Number: 2014646 Size: SH
  8. Remove the three screws.

    9. Object Number: 2014647 Size: SH
  9. Using a trim removal tool, disengage the ten retainers.
  10. Disengage the five clips and separate the front door trim panel front the front door inner belt sealing strip.
  11. Remove the front door trim panel from the vehicle.

Installation Procedure

    Object Number: 2014647 Size: SH
  1. Install the front door trim panel to the vehicle.
  2. Engage the five clips and install the front door trim panel to the front door inner belt sealing strip.
  3. Engage the ten retainers.

    4. Object Number: 2014646 Size: SH
  4. Install the three screws.
  5. Install the right front door power switch, if equipped. Refer to Front Side Door Window Switch Replacement - Right Side .
  6. Install the power accessory switch panel, if equipped. Refer to Power Accessory Switch Panel Replacement .

    7. Object Number: 2014631 Size: SH
  7. Install the front door trim armrest to the front door trim panel.
  8. Connect the electrical connector, if equipped.
  9. Engage the clip and the seven retainers.

    10. Object Number: 2014628 Size: SH
  10. Engage the three clips, and install the front door inside handle bezel.
  11. Remove the door window regulator handle, if equipped. Refer to Door Window Regulator Handle Replacement .