GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Sunfire 🢒 Body and Accessories 🢒 Doors 🢒 Energy Absorber Pad Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Door Trim Panel Replacement .

    2. Object Number: 279019 Size: SH
  2. Remove the bolts (2).
  3. Remove the rear door energy absorber (1).

Installation Procedure

    Object Number: 279019 Size: SH
  1. Install the rear door energy absorber (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts (2).

    3. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  3. Install the door trim panel. Refer to Door Trim Panel Replacement .