GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Sunfire 🢒 Body and Accessories 🢒 Doors 🢒 Outside Rearview Mirror Motor Replacement

Removal Procedure

    Object Number: 468274 Size: SH
  1. Remove the electric mirror. Refer to Outside Rearview Mirror Replacement .
  2. Remove the glass from the mirror housing. Refer to Outside Rearview Mirror Glass Replacement .
  3. Remove the mirror motor retaining screws.
  4. Disconnect the electric connector.
  5. Remove the motor.

Installation Procedure

    Object Number: 468274 Size: SH
  1. Install the motor.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the mirror motor retaining screws.

    3. Tighten
    Tighten the electric mirror motor screws to 10 N·m (89 lb in).

  3. Connect the electric connector.
  4. Install the glass to the mirror housing. Refer to Outside Rearview Mirror Glass Replacement .
  5. Install the electric mirror. Refer to Outside Rearview Mirror Replacement .