Preliminary Procedure

1. Remove the instrument panel cluster (IPC) trim plate. Refer to Instrument Cluster Trim Panel Replacement.
2. Remove the driver knee bolster trim panel. Refer to Knee Bolster Replacement.
3. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement.
4. Remove the I/P inflatable restraint. Refer to Instrument Panel Inflatable Restraint Module Replacement.
5. Remove the right and left I/P outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side and Instrument Panel Outer Trim Cover Replacement - Left Side.
6. Remove the right and left windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement.
7. Remove the I/P extension trim plate. Refer to Instrument Panel Extension Trim Plate Replacement.

1

I/P Trim Pad Screw (Qty: 17)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

I/P Trim Pad Assembly

Procedure

Disconnect the electrical connectors.