GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 315802  Size: MH
  1. Remove the front door rubber conduit. Refer to Front Side Door Conduit Replacement .
  2. Support the front door.
  3. Remove the intermediate front door hinge bolts
  4. Remove the front door, with an assistant.

Installation Procedure


    Object Number: 315802  Size: MH
  1. Install the door, with an assistant.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the intermediate door hinge bolts.
  4. Tighten
    Tighten the intermediate door hinge bolts to 33 N·m (24 lb ft).

  5. Remove the support.
  6. Install the front door rubber conduit. Refer to Front Side Door Conduit Replacement .