GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 308354  Size: SH
  1. Remove the front door rubber conduit (1) from where it attaches at the front pillar.
  2. Carefully pull the wire harness out from the front pillar to expose the harness connector.
  3. Disconnect the front door wiring harness electrical connector.
  4. Remove the front door rubber conduit from the front door and remove it from the electrical harness.

Installation Procedure


    Object Number: 308354  Size: SH
  1. Thread the front door electrical harness through the front door rubber conduit (1).
  2. Install the front door rubber conduit onto the front door.
  3. Connect the front door wiring harness electrical connector.
  4. Install the front door rubber conduit to the front pillar.