Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .



2. UseJ 38778 to remove the rear bumper energy absorber from the impact bar push---in retainers.
3. Remove the rear bumper energy absorber from the rear bumper impact bar.

1. Install the rear bumper energy absorber to the rear bumper impact bar.

Important: Route the tail lamp wiring through the cutout in the rear bumper energy absorber.

2. Install the rear bumper energy absorber to the impact bar push-in retainers.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .