Removal Procedure
- Remove the headlamp assembly from the vehicle. Refer to Headlamp Replacement .
- Disconnect the electrical connector from the headlamp bulb.
- Rotate the headlamp bulb retaining ring counterclockwise to release, then remove the ring.
- Remove the headlamp bulb from the capsule.
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
Installation Procedure
- Install the headlamp bulb to the capsule.
- Install the headlamp bulb retaining ring to the capsule, then rotate clockwise to secure.
- Install the headlamp assembly to the vehicle. Refer to Headlamp Replacement .
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
