GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Bumpers 🢒 Rear Bumper Fascia Outer Support Replacement

Removal Procedure

    Object Number: 1335017 Size: SH
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Remove the screws (3) attaching the outer support (1).

    3. Important: Make sure the seals (2) are removed with the outer support (1).

  3. Pull the outer support (1) out to detach it from the vehicle.

Installation Procedure

    Object Number: 1335017 Size: SH
  1. Position the rear bumper fascia outer support (1) with the seals (2) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws (3) attaching the rear bumper fascia outer support (1) to the vehicle.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .