GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 GTO 🢒 Body 🢒 Body Rear End 🢒 Rear Compartment Lid Lock Actuator Replacement

Removal Procedure
  1. Open the rear compartment.
  2. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

    3. Object Number: 1245620 Size: SH
  3. Remove the 2 screws (3) attaching the actuator assembly (2) to the rear compartment lid (4).
  4. Disconnect the connecting rod (5) from the rear compartment lid latch assembly, if necessary.
  5. Withdraw the actuator assembly (2) from the keyhole slots in the panel.
  6. Remove the actuator assembly (2) from the panel cavity far enough to disconnect the electrical connector (1).
  7. Remove the lock actuator assembly (2) from the rear compartment lid (4).

Installation Procedure

    Object Number: 1245620 Size: SH
  1. Position the lock actuator assembly (2) to the rear compartment lid (4).
  2. Connect the electrical connector (1) and insert actuator assembly (2) into the cavity panel.
  3. Align the actuator assembly (2) to the key hole slots in the panel.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Connect the connecting rod (5) to the rear compartment lid latch assembly, if removed.
  5. Install the 2 screws (3) to the actuator assembly (2).

    6. Tighten
    Tighten the screws to 3 N·m (26 lb in).

  6. Install the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
  7. Close the rear compartment.