Tools Required

1. Remove the fuel rail covers from the engine.
2. Install J 41803 andJ 28467-B and support the engine.
3. Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side in Engine Exhaust.
4. Remove the engine mount to bracket nut..
5. Remove the engine mount bracket bolts.
6. Remove the engine mount bracket.

1. Install the engine mount bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the engine mount bracket bolts.

Tighten
Tighten the engine mount bracket bolts to 50 N·m (37 lb ft).

3. Install the engine mount to bracket nut.

Tighten
Tighten the engine mount to bracket nut to 80 N·m (59 lb ft).

4. Install the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side in Engine Exhaust.
5. Remove J 41803 andJ 28467-B from the engine.
6. Install the fuel rail covers to the engine.