Generator Bracket Replacement 3.6L

1. Remove the alternator. Refer to Generator Replacement.



2. Remove the coolant inlet pipe to alternator mounting bracket retaining nut (3).
3. Remove the alternator mounting bracket to cylinder block retaining bolts (4).
4. Remove the alternator mounting bracket (2) from the cylinder block (1).

1. Install the alternator bracket (2) to the engine block.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the alternator bracket to engine block retaining bolts and tighten to 50 N·m  (37 lb ft).
3. Install the coolant inlet pipe to alternator mounting bracket retaining nut (3) and tighten to 22 N·m (16 lb ft).

Generator Bracket Replacement 6.0L

Warning: Refer to Safety Glasses Warning in the Preface section.

1. Ignition OFF.
2. Remove the alternator. Refer to Generator Replacement.



3. Remove the alternator bracket to engine block mounting bolts (1).
4. Remove the alternator bracket (2) from the vehicle.

1. Install the alternator bracket (3) to the engine block.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the alternator bracket to engine block mounting bolts (1). Tighten the bolts in the sequence shown. Tighten the bolts (1) to 27 N·m  (20 lb ft) and the bolts (2) to 50 N·m  (37 lb ft).
3. Install the alternator. Refer to Generator Replacement.