For 1990-2009 cars only
Removal Procedure
- Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the door module. Refer to Door Control Module Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the door window inner belt molding. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
- Remove the door window outer belt molding. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Remove the rear door window. Refer to Rear Side Door Window Replacement .
- Grasp the front, lower end of the window weatherstrip (3) and pull it out of the door frame, far enough to expose the door applique fasteners.
- Remove the applique fasteners.
- Remove the applique.
| 9.1. | Tilt the rear of the applique outward. |
| 9.2. | Slide the applique forward and down. |
Installation Procedure
- Slide the door applique up under the auxiliary weatherstrip and rearward over the door frame.
- Install the door applique fasteners.
- Reinstall the front portion of the door window weatherstrip.
- Install the rear door window. Refer to Rear Side Door Window Replacement .
- Install the door window outer belt molding. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Install the door window inner belt molding. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
- Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Install the door module. Refer to Door Control Module Replacement .
- Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
Important: When reusing the window weatherstrip, the flange mounting area (1) must be pinched together to counteract the splaying effect when removed. Use thumb and index finger to pinch the carrier (2) back together. Work from one end of the weatherstrip to the other.
