Rear Energy Absorber Replacement Aztek

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
2. Using J 38778 , remove the push-in retainers from the rear bumper energy absorber.



3. Remove the rear bumper energy absorber from the rear bumper impact bar.

1. Install the rear bumper energy absorber to the rear bumper impact bar.



2. Install the push-in retainers to the rear bumper energy absorber.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .