GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the rear compartment.
  2. Pull back the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement .

  3. Object Number: 182261  Size: SH
  4. Remove the rear compartment lid lock striker bolt from inside the rear compartment.
  5. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement in Bumpers.
  6. Remove the rear compartment lid lock striker bolts from outside the vehicle.
  7. Remove the rear compartment lid lock striker.

Installation Procedure

  1. Install the rear compartment lid lock striker to the rear compartment body panel.

  2. Object Number: 182261  Size: SH
  3. Install the rear compartment lid lock striker bolts to the outside of the vehicle.
  4. finger tighten the outside bolts allowing for the adjustment of rear compartment lid lock striker.
  5. Close the rear compartment lid to set adjustment.
  6. Tighten the rear compartment lid lock striker bolts.
  7. Tighten
    Tighten the rear compartment lid lock striker bolts to 16 N·m (11 lb in).

  8. Open the rear compartment lid.
  9. Important:  Due to sealer squeeze out on rear compartment lid lock striker bolts/screws, recheck fastener tightening specifications at least two times.

  10. Tighten the rear compartment lid lock striker lock striker bolt inside the rear compartment.
  11. Tighten
    Tighten the rear compartment lid lock striker bolt to 16 N·m (11 lb in).

  12. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement .
  13. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement in Bumpers.
  14. Close the rear compartment.