GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Intrigue 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Parking Brake Support Replacement

Removal Procedure

    Object Number: 177170 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Wheel Removal in Tires and Wheels.
  3. Remove the brake caliper bracket. Refer to Rear Brake Caliper Bracket Replacement in Disc Brakes.
  4. Remove the brake rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.
  5. Loosen the brake cables at the equalizer (2).

    6. Object Number: 177190 Size: SH
  6. Remove the cable from the actuator lever.
  7. Remove the parking brake return spring.
  8. Remove the cable from the parking brake bracket.

    9. Object Number: 177182 Size: SH
  9. Remove the parking brake bracket bolts (9).
  10. Remove the parking brake bracket (8) from the support plate (7).
  11. Remove the rear wheel hub. Refer to Rear Wheel Bearing and Hub Replacement in Rear Suspension.
  12. Remove the parking brake shoe and lining. Refer to Parking Brake Shoe Replacement .
  13. Remove the parking brake actuator (5).
  14. Remove the support plate (7).

Installation Procedure

    Object Number: 177182 Size: SH
  1. Install the parking brake support plate (7).
  2. Install the parking brake shoe and lining. Refer to Parking Brake Shoe Replacement .
  3. Install the rear wheel hub. Refer to Rear Wheel Bearing and Hub Replacement in Rear Suspension.
  4. Install the parking brake actuator (5).

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the parking brake bracket (8) onto support plate (7).

    6. Tighten
    Tighten the parking brake bracket bolts (9) to 10 N·m(89 lb in).


    Object Number: 177190 Size: SH
  6. Install the cable onto the parking brake bracket.
  7. Install the parking brake return spring.
  8. Install the cable onto the actuator lever.

    9. Object Number: 177170 Size: SH
  9. Tighten the nut on the equalizer (2) in order to remove the slack in the cable.
  10. Install the brake rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.
  11. Install the brake caliper bracket. Refer to Rear Brake Caliper Bracket Replacement in Disc Brakes.
  12. Install the tire and wheel. Refer to Wheel Installation in Tires and Wheels.
  13. Lower the vehicle.
  14. Adjust the parking brake. Refer to Park Brake Cable Service/Adjustment .