Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the engine coolant from the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the left diagonal brace. Refer to Front End Sheet Metal Diagonal Brace Replacement in Body Front End.



3. Disconnect the inlet hose from the radiator using the J 38185 .



4. Disconnect the inlet hose from the thermostat housing using the J 38185 .
5. Remove the inlet hose.

1. Install the inlet hose in position and align the marks on the hose.
2. Connect the inlet hose to the thermostat housing using the J 38185 .



3. Connect the inlet hose to the radiator using the J 38185 .
4. Install the left diagonal brace. Refer to Front End Sheet Metal Diagonal Brace Replacement in Body Front End.

Important: To properly fill the system you must use the air bleed vents.

5. Fill the cooling system with engine coolant. Refer to Cooling System Draining and Filling .
6. Inspect for leaks.