GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1998 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust Brake Ball Joint Replacement

Removal Procedure
  1. Remove the exhaust brake actuator.

    2. Refer to Engine Brake Actuator Control Valve Replacement .

  2. Remove the wire retaining clip from the ball joint.
  3. Detach the ball joint from the assembly.

Installation Procedure
  1. Install a new ball joint cap.
  2. Install a new wire retaining clip.
  3. Install the exhaust brake actuator.

    4. Refer to Engine Brake Actuator Control Valve Replacement .