Preliminary Procedure

Remove the rear back seat cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement.

1

Rear Seat Back Cushion Cable Fastener (Qty: 2)

Caution: Replacement components must be the correct part number for the application. Components requiring the use of the thread locking compound, lubricants, corrosion inhibitors, or sealants are identified in the service procedure. Some replacement components may come with these coatings already applied. Do not use these coatings on components unless specified. These coatings can affect the final torque, which may affect the operation of the component. Use the correct torque specification when installing components in order to avoid damage.

Tighten
2 N·m (18 lb in)

2

Rear Seat Back Cushion Cable

Procedure

1. Disconnect the cable from the latch before removing.
2. Transfer components as necessary.