Preliminary Procedure

1. Remove the rear seat back panel. Refer to Rear Seat Back Cushion Trim Panel Replacement .
2. Remove the rear seat back. Refer to Rear Seat Back Replacement .

1

Rear Seat Back Cushion Cover

Procedure

1. Remove the rear seat recliner handle bezels by pushing forward and pulling up on the rear of the bezel.
2. Disengage the center seat belt bezel from the seat back.
3. Remove the lower bolt from the center seat belt.
4. Remove the rear seat hinge finish covers. Refer to Rear Seat Back Cushion Hinge Cover Replacement .
5. Remove the rear seat back anchor plate reinforcement.
6. Remove the seat back cushion cover and pad as an assembly and feed the center seat belt through the opening when removing.

2

Rear Seat Back Cushion Pad

Procedure

Remove the hog rings that secure that seat back cover to the seat back pad.

Preliminary Procedures

1. Remove the rear seat. Refer to Rear Seat Replacement.
2. Remove Rear Seat Back Cushion Latch Bezel. Refer to Rear Seat Back Cushion Latch Bezel Replacement

1

Rear Seat Head Restraint

Procedure

1. Raise the headrest to the full upward position.
2. Depress the flush button on the head restraint guide.
3. Remove the head restraint by pulling up on the restraint.

2

Rear Seat Head Restraint Guide

Procedure

Squeeze the bottom of the head restraint guide together and push up to remove.

3

Rear Seat Back Cushion Cover

Procedure

1. Disconnect the seat back cushion cover j-channel from the seat cushion frame.
2. Disconnect the electrical connector if equipped with a heated seat.
3. Pull the seat back cushion cover away from the seat cushion pad to disengage the retaining channel.

4

Rear Seat Back Cushion Pad

Procedure

Transfer components as necessary.