Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .



2. Use the J 38778 to remove the rear bumper energy absorber to rear bumper impact bar push--in retainers (3).
3. Remove the rear bumper energy absorber (2) from the rear bumper impact bar (1).

1. Install the rear bumper energy absorber (2) to the rear bumper impact bar (1).
2. Install the rear bumper energy absorber to rear bumper impact bar push--in retainers (3).
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .