GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

DEFINITION: The CHECK GAUGES indicator does not come on with engine oil pressure below approximately 34.5 kPa, or with engine coolant temperature above approximately 118°C (245°F).

1

Did you review the instrument cluster circuit description and perform the necessary inspections?

--

Go to Step 2

Go to Symptoms

2

Start the engine and allow to reach normal operating temperature.

Does the check gauges indicator come on for bulb check, then go out?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

3

  1. Stop the engine.
  2. Place the ignition switch in RUN.
  3. Observe the temperature gauge.

Does the temperature gauge indicate temperature greater than the specified value?

118.3°C (245°F)

Go to Step 5

Go to Step 4

4

  1. Start the engine.
  2. Observe the oil pressure gauge.

Does the oil pressure gauge indicate pressure less than the specified value?

34.5 kPa (5 psi)

Go to Step 6

Go to Step 7

5

Refer to Engine Coolant Temperature Gauge Always Hot .

Is the check gauges indicator lamp still inoperative?

--

Go to Step 7

Go to Step 8

6

Refer to Engine Oil Pressure Gauge Always Low .

Is the check gauges indicator lamp still inoperative?

--

Go to Step 7

Go to Step 8

7

Replace the instrument cluster. Refer or Instrument Cluster Replacement .

Is the repair complete?

--

Go to Step 3

Go to Step 8

8

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3