GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Bumpers 🢒 Rear Bumper Impact Bar Replacement

Removal Procedure
  1. Remove the rear fascia assembly. Refer to Rear Bumper Fascia Replacement .

    2. Object Number: 1360918 Size: SH
  2. Remove the energy absorber. Refer to Rear Energy Absorber Replacement .
  3. Remove the bolts.
  4. Remove the impact bar from the vehicle.

Installation Procedure

    Object Number: 1360918 Size: SH
  1. Position the impact bar to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the energy absorber. Refer to Rear Energy Absorber Replacement .
  4. Install the rear fascia assembly. Refer to Rear Bumper Fascia Replacement .