GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Bumpers 🢒 Rear Bumper Fascia Replacement

Removal Procedure

    Object Number: 1344389 Size: SH
  1. Remove the rear fascia bolt covers.
  2. Remove the rear fascia bolts.

    3. Object Number: 1344392 Size: SH
  3. Remove the screw from inside the rear wheelhouse.

    4. Object Number: 1344395 Size: SH
  4. Remove the wheelhouse liner to rear fascia push-in retainers (1).

    5. Object Number: 1344396 Size: SH
  5. Remove the push-in retainers (1) from the bottom of the fascia.

    6. Object Number: 1344389 Size: SH
  6. Pull the fascia out at the rear wheelhouse liner to disengage.
  7. Pull rearward from the vehicle to remove.

Installation Procedure
  1. Position the rear fascia to the vehicle.

    2. Object Number: 1344396 Size: SH
  2. Install the push-in retainers (1) to the bottom of the fascia.

    3. Object Number: 1344395 Size: SH
  3. Install the wheelhouse liner to the fascia push-in retainers (1).

    4. Object Number: 1344392 Size: SH
  4. Install the screws from inside the rear wheelhouse.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the rear fascia screws.

    6. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Install the rear fascia bolt covers.